BACK
 
The "SLINGSHOT" Antenna
for 2 Meters

Re-edited by N4UJW from an original article by David Younker
KA8OGD (callsign no longer active)
73 Magazine April 1989

 


THE SLINGSHOT ANTENNA
NOT DRAWN TO SCALE
Please note in drawing that elements are bent 90 degrees. Make your bends as needed depending on material used for elements. If you use copper tubing, a 90 degree elbow on each should work fine. If you are comfortable with bending, great, if not, get the hardware store to do it for you!